Loading... Please wait...
  • Image 1

RED JASPER OVERDRIVE RJ-1V

$265.00

SKU:
RJ-1V
Weight:
0.40 KGS
Shipping:
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.


Product Description

RED JAPSER, a low gain overdrive pedal that’s driven by the player’s emotions.

Smooth highs, punchy mids, full but tight lows, sensitive, responsive, natural and pleasing compression feel. Free The Tone’s first low gain overdrive pedal “Red Jasper” has been designed to obtain these magical attributes that only superb vintage tube amps can usually produce.
The Red Jasper amplifies the guitar’s original sound faithfully, adopting a passive type tone circuit to minimize phase errors in the guitar signal and obtain a natural tone. With first priority placed on sound, a slightly larger die-cast case is adopted.

Try the Red Jasper overdrive pedal and experience how it can “amplify” all of the information created by the guitarist’s fingertips and connect to the player’s emotions.

Smooth highs, punchy mids, full but tight lows, sensitive, responsive, natural and pleasing compression feel. Free The Tone’s first low gain overdrive pedal “Red Jasper” has been designed to obtain these magical attributes that only superb vintage tube amps can usually produce.
The Red Jasper amplifies the guitar’s original sound faithfully, adopting a passive type tone circuit to minimize phase errors in the guitar signal and obtain a natural tone. With first priority placed on sound, a slightly larger die-cast case is adopted.

Try the Red Jasper overdrive pedal and experience how it can “amplify” all of the information created by the guitarist’s fingertips and connect to the player’s emotions.

Main Features

Free The Tone’s original HTS (Holistic Tonal Solution) circuit that manages signals comprehensively from input to output
Passive type tone circuit to minimize phase errors in the guitar signal
Astoundingly excellent Signal-to-Noise ratio
Exceptional sound stability by using long-life high reliability components

Specifications

Input Impedance: 1MΩ
Output Load Impedance: min. 10kΩ
Controls: LEVEL、HI-CUT、DRIVE
(socket for AC adapter)
Power Source: 1 x 9V battery or AC adapter
Current Consumption: 9VDC, 15mA approx.
Dimensions :123(D) x 100(W) x 53 (H)mm (Including foot switch, jack and
rubber feet)
Weight : 320g approx. (Not including battery)

About HTS (Holistic Tonal Solution) Circuit

The newly developed Free The Tone HTS Circuit brings a brand new concept to effect pedals.

The HTS circuit essentially functions to manage the interface of the effector from signal input to the output. This solves not only the problem with a True-Bypass circuit and the weak point of a combination of a general buffer circuit and an electronic switch, but also totally and effectively manages the interface between effectors connected before and after the effect circuit inside of the HTS circuit.

The compatibility of pedals when they are connected together will be influenced by the signal level and the characteristics of the input and output impedance. The signal characteristics as a result of a combination of true-bypass effectors will be changed every time an effector is switched on or off. The change of signal characteristics will have a drastic affect on the sound quality and/or sound image. You may have felt a fundamental difference in sound quality or a feeling that something just isn’t right in the past. This is a major problem of effectors that is relatively unknown.

The HTS Circuit consists of 3 separate circuits: 1. Input Circuit, 2. Noiseless Effect On/Off Circuit and 3. Output Driver Circuit. The Input Circuit receives the signal properly depending on the conditions of the signal source, eliminates noise from unnecessary frequency bands and then sends the pure guitar signal to the effect circuit. The Free The Tone effectors have a very low S/N ratio thanks to the HTS Circuit.

The effected signal is sent to the Noiseless Effect On/Off Circuit. This circuit transfers the guitar sound faithfully without any feeling of dullness or distortion that is often unique to electronic switching circuits, because no switching element, such as an FET, is used. The effected sound signal or bypassed sound signal, selected by the Noiseless Effect On/Off Circuit, is sent to the Output Circuit and then to any other equipment connected after the effector in the signal chain. Regardless of whether the effector is on or off, the signal output impedance remains fixed so that a stable signal is provided all the time. And when the effector is turned off, the HTS Circuit outputs a signal that remains true to the original natural guitar sound.

The effected sound and bypassed sound managed by the HTS Circuit will always have the same sound quality, which solves a problem that has plagued players for years.

 

 

Product Videos

Free The Tone: RED JASPER Low-Gain OD - Demo and Review ()
  • Free The Tone: RED JASPER Low-Gain OD - Demo and Review

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review




Sign up to our newsletter


Connect with us: Facebook Twitter GooglePlus